All Products
-
High Voltage Ceramic Capacitor
-
High Voltage Doorknob Capacitors
-
High Voltage Film Capacitor
-
Live Line Capacitors
-
Surge Protective Device
-
High Voltage Vacuum Circuit Breaker
-
Switchgear Temperature Sensor
-
Voltage Instrument Transformers
-
Capacitive Voltage Detector
-
Capacitive Voltage Divider
-
Capacitive Insulator
-
MOV Metal Oxide Varistor
-
PTC NTC Thermistor
-
High Voltage Resistors
-
Richard“XIWUER is very innovative. They have provided excellent, intuitive service, looking ahead into the future as to what we might need.” -
Mike"XIWUER's dedication to designing different specifications to meet our stringent processing requirements is a testament to our years of research and development." -
Marry"XIWUER has impressive research capabilities and demonstrates good prototyping capabilities and high product quality."
Contact Person :
Wang Hong
MYS20-320/20-2P Class C Surge Protector With Remote Signaling Alarm Device For Lightning Protection Of AC Equipment
Contact me for free samples and coupons.
Whatsapp:0086 18588475571
Wechat: 0086 18588475571
Skype: sales10@aixton.com
If you have any concern, we provide 24-hour online help.
xProduct Details
| Nominal Voltage Un | 230VAC | Nominal Discharge Surge Current In | 20kA |
|---|---|---|---|
| Max. Discharge Surge Current For Class Ⅱ | 50kA | Protection Level Up With In | ≤1500V |
| (Back-up Fuse | 63A GL/gG | IEC Category | Class Ⅱ |
| Highlight | lightning protection Surge Protector,AC equipment Surge Protector,MYS20-320/20-2P Surge Protector |
||
Product Description
MYS20-320/20-2P Class C surge protector with remote signaling alarm device for lightning protection of AC equipment
Description
MYS20-320/20-2P (S) is a Class C surge protector with a remote signaling alarm device.
Features
-
Selection of high-quality varistors, high reliability, quality assurance, and stable performance
-
Modular design can be plugged and unplugged when powered, convenient for testing or replacement
-
With a remote alarm device for easy remote monitoring
-
Using temperature-controlled circuit breaker technology, dual automatic protection circuits for overcurrent and overvoltage
-
With work and fault display, the deterioration status is clear at a glance
Product fundamentals
The SPD is connected in parallel between the line and the ground. Under normal operating voltage, the MOV is in a high-resistance state, which is equivalent to the line being open to the ground and does not affect the normal operation of the line. The fault display window is green, as shown in Figure 2.
When an instantaneous pulse overvoltage occurs on the line due to lightning or switching operation, the lightning protection module quickly conducts in nanoseconds, short-circuiting the overvoltage to the earth and discharging it. When the pulse overvoltage disappears, the lightning protection module automatically returns to high voltage. resistance state, does not affect the user's power supply. When the lightning protection module works in an overloaded state for a long time, and its performance deteriorates when it heats up to a certain temperature, the thermal protector (K1) in the module (as shown in Figure 3) will automatically disconnect the lightning protection module circuit to protect the power circuit. Work will not be affected and fires will be prevented in time.
When excessive lightning current is induced in the line, the overcurrent protector (K2) is quickly disconnected to prevent the SPD from exploding. K1 or K2 action
Then, the tripping device in the SPD acts, causing the fault display window to display red (as shown in Figure 4), reminding the user to replace the SPD. At the same time, the tripping device drives the remote signaling alarm switch (SK) to act and output a fault alarm signal.
Application
MYS20-320/20-2P (S) is mainly used for lightning protection of AC equipment 230V system and operation over-voltage protection.
Technical Parameter
| 规格型号(Spec.) | MYS20-320/20-2P (S) | |||
|
IEC 类别/VDE 规格等级/EN 类别 (IEC category/VDE requirement class/EN type) |
Ⅱ级 | |||
| 标称电压 Un (Nominal voltage Un) | 230VAC | |||
|
额定电压/最大持续运行电压 (L-PE) Uc (Arrester rated voltage /Maximum continuous operating voltage, Uc) |
320VAC | |||
|
雷击测试 (Arrester discharge surge test) |
Ⅰ类试验用冲击电流 Iimp (波形/电量/特征能量) (Discharge surge test current for class Ⅰ) |
----- |
||
|
额定放电电流 In (8/20μs) (Nominal discharge surge current In & test waveform) |
20kA | |||
|
Ⅱ类试验用最大放电电流 Imax (8/20μs) (Max. discharge surge current for class Ⅱ& test waveform) |
50kA |
|||
| In 时的保护水平 (L/N-PE) Up (Protection level Up with In) | ≤1500V | |||
| 保护模式 (Protective Mode) | L-PE ,N-PE | |||
| 响应时间 (L/N-PE) (Response time ta) | 25ns | |||
| 最大后备熔丝(Back-up fuse/ breaker) | 63A gL/gG | |||
| 内部保护装置(Internal Protection device) | 防雷单元内置热脱扣机构 | |||
| 劣化失效指示( Deterioration failure indication) | 具有指示窗口,故障状态为红色 | |||
| 绝缘外壳材料品牌及规格(Insulation housing type) | 420SE0 | |||
| 阻燃等级(Inflammability class in acc. with UL94) (符合 UL94) | V0 | |||
| 防护等级(Degree of protection in acc. With IEC 529/EN 60529 ) | IP20 | |||
| 测试标准(Test standards) | EN 61643- 11: 2012 | |||
|
装配 (installation) |
安装支架(installation bracket) | 35mm 标准导轨 | ||
| 安装导体截面(installation conductor type) | 多芯线:1.5-25mm2,单芯线:1.5-35mm2 | |||
| 裸线压接长度(Bare wire connection length) | 12.5mm | |||
| 螺孔类型(Thread) | M6/M2 | |||
| 扭矩(Torque) | 2.5Nm/0.25Nm | |||
| 遥信触点类型(Remote ind. contact) | 可选配 | |||
|
最大允许工作电压 Umax (Max. perm. Operating voltage Umax ) |
125VAC/30VDC | |||
| 端子性能 (Contact data) |
最大允许工作电流 交流 ImaxAC(Q /Ind.) (Max. perm. Operating current Imax AC ) |
1A | ||
|
最大允许工作电流 直流 ImaxDC(Q /Ind.) (Max. perm. Operating current Imax DC ) |
0.5A | |||
| 遥信端子导体截面(conductor type) | mm2 | 0.2 | ||
|
环境要求 (operating and storage conditions) |
贮存温度℃ (Temp. ) | 工作温度℃ (Temp. ) |
湿度 (Humidity) |
大气压 (atmospheric pressure) |
| -40℃~+85℃ | -40℃~+80℃ | 不大于 95% (25℃) | 不低于 56.04kPa | |
Dimension
COMPANY OVERVIEW
Xian Xiwuer Electronic and Info. Co., Ltd is a wholly state-owned company with a registered capital of CNY 101.465 million (exchanged to USD15.85 million), owning total assets of CNY315 million (traded to USD 49.22 million). It was established in 1976. Currently, it has about 460 employees, with an annual sales income of CN280 million (exchanged to USD43.75 million). The company has four production and business bases covering an area of 43052 square meters, and a construction area of more than 50000 square meters. The company has 8 persons with master's degrees, more than 80 engineers with senior technical titles 12 technicians who have been awarded Experts with Outstanding Contributions by the Xian municipal government, and 1 expert who has been enjoying a special allowance from the State Council.
The main products include
l Smart Embedded Epoxy Pole；
l Integrated Instrument Transformer
l Capacitive Voltage Divider
l Rogowski Coil
l High Voltage Capacitor Rod；
l High Voltage Film Capacitor；
l High Voltage Resistor；
l Primary and Secondary Integrated Intelligent assembly and components with the function of
l voltage measurement, current measurement, protection, temperature monitoring, and power supply；
l Medium-High Voltage components/parts/ assembly；
l Surge Protective Device for Power Supply System；
l Chips for lightening devices；
l Zinc Oxide Varistor；Thermistor.
Major Customers: ABB, Schneider, GE, ZTE, XD Electric, XJ Electric, PingGao Electric and etc.
The company has the provincial Technical R&D Center. The company has developing and manufacturing experiences of the key products HV Ceramic Capacitor, SPD, Varistor, Thermistor and for nearly 20 years. There have been 32 patented technology, 4 invention patents, and 4 national key new products. The company is in the leading position in the same industry. The company has grown very fast with a unique management system which is the fundamental guarantee to the continuous development of the enterprise under the state-owned system. In Northwest China, the company is the first to implement ISO 9001 standards and the first to promote the use of ERP management systems, having achieved ISO9001, ISO14001, and ISO45001 approval, thus standardizing and improving the management level of the company.
Through continuous technological innovation, product R&D, and quality improvement the main technical performance and reliability of the products are at the internationally advanced level as the same level with Panasonic and Siemens. The products have got UL, VDE, TUV, CAS, CE, CQC, RoHS, and REACH Certification. The company has advanced production equipment among which the key production equipment and modern assembly lines are imported from Japan, the U.S.A, Germany, Korea, and Belgium including 26m large sintering tunnel furnaces8 automatic assembly lines, the largest energy impulse current generator and a series of special test equipment and environmental test equipment. In the same industry in China, the company has the largest production capacity, the highest degree of automation with the most complete testing methods. The company has two routine test laboratories with the most advanced lightning testing equipment and environmental testing equipment which comply with national standards for laboratory construction. They are the significant laboratories supported by Shaanxi Province with professional testing technicians undertaking part of the supervision and inspection of electronic products in Shaanxi Province at the same time.
We believe we are able to supply satisfied goods and services to customers at home and abroad with the most reasonable price and the shortest delivery time. on the bases of our excellent quality assurance capacity, technical development capacity, and rich manufacturing experiences.
CERTIFICATE
Recommended Products
-
VIDEO